1, first soak and wash. Before washing, soak the clothes in a soap or detergent solution for 10–14 minutes to allow the dirt on the detergent and clothing to work and then wash. In this way, not only can the clothes be washed more cleanly, but also the washing machine's operating time can be reduced by about half, and the power consumption can be reduced by half accordingly.
2, separation washing, shallow first and then deep. Different colors of clothes are washed separately, not only to wash cleanly, but also to wash faster, and can be shortened by 1/3 of the time than washing together. For some non-dirty clothing, less washing powder can also reduce the number of rinses.
3, first thin and thick. Generally thin and soft chemical fiber and silk fabrics can be washed in 45 minutes, while cotton and woolen fabrics with thick texture can be washed in 10 minutes. Thickness and wash separately, than washing together can effectively shorten the washing machine running time.
4, centralized washing. Centralized washing is a very cost-effective laundry method. That is, a bucket of detergent is used to wash several batches of laundry in a row. The detergent powder can be properly added, and then all of the detergents are rinsed one by one. This saves water, saves washing powder and laundry time.
5, rated capacity. If the amount of washing is too small, the electric energy is consumed in vain; on the other hand, too much washing at one time will not only increase the washing time, but also cause the motor to be overloaded, which increases the power consumption and easily damages the motor.
6, moderate water consumption, not too much or too little. Too much water will increase the water pressure of the wave plate, increase the burden on the motor and increase the power consumption; too little water will affect the up and down movement of the clothes during washing, increase the washing time, and increase the power consumption.
7, correctly grasp the washing time, to avoid invalid actions. The degree of cleanliness of the clothes is mainly related to the degree of dirt in the clothes, the type and concentration of the detergent, and is not directly proportional to the washing time. Exceeding the prescribed washing time, the degree of cleanliness will not be greatly improved, and the electrical energy will be consumed in vain.
8, adjust the belt of the washing machine. The belt slips and looses, the current does not decrease, and the laundry effect is poor; tightening the belt of the washing machine not only restores the original efficiency, but also does not consume much power.
9, the program is reasonable. After the clothes have been washed for the first time, it is best to dry the clothes and squeeze the dirty water. In this way, when rinsing, the time can be shortened, and the water saving can be saved.
10, try to use water-saving washing machines. Of course, if possible, we suggest that you should have a washing machine that is relatively functional and relatively water- and power-efficient. This can save you a lot of water consumption, save time and effort, and serve two purposes.
Previous: No Information
Related Industry Knowledge
- Under the condition that the origin...
- Calculation method of vibrator ecce...
- Analysis and summary of the dust pr...
- The vibration motor is installed on...
- The vibration motor is installed at...
- Clutch definition
- Electromagnetic clutch
- Magnetic particle clutch
- friction clutch