WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > Exhibition > Content
Haier washing machine bearing operation and precautions
- Apr 19, 2018 -

Haier washing machine bearing in the process of replacement, the need to effectively remove the entire inner tube of the whole change, about 3-4 hours before it can be replaced, if you open the back cover, the tripod can be taken smoothly When it comes down, that's a very simple bearing change. If it goes well, it can take no more than an hour.

Haier washing machine bearing operation process

1. Disassemble the rear cover of the Haier drum washing machine.

2. Remove the cleaning box in front of the Haier drum washing machine. Remove the upper panel.

3. The weights on the top of the Haier drum washing machine are removed.

4. Place the Haier drum washing machine and remove the bottom panel.

5. Remove the bottom weight and snap.

6. Remove the half barrel screw and remove the half barrel.

7. Disassemble the bearings of the lower Haier drum washing machine and replace it with a new one.

8. In accordance with the above disassembly sequence, install the disassembled parts in reverse order.

Haier washing machine bearing considerations

1. Disassemble parts in order.

2. Do not install screws.

http://www.clutchwxxindu.com/