WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > Exhibition > Content
How to remove Haier washing machine clutch?
- May 12, 2017 -

1 remove the cover plate of the washing machine

2 take out the inner barrel, remove all the wire interface, invert.

3 remove the capacitor, although it is not bad, but it affects the operation.

4 remove the protective cover of the turbine turntable, a total of 4 screws.

5 remove the screw from the fixed motor, loosen it, and remove the belt.

6 take off the belt.

图3.png

7 remove the root wire from the gap, this wire is to open the valve.

8 remove the spring from the place and separate it from the ratchet.

9 take off the turbine has a screw, the screw is very tight. And the turbine turned again. I ordered a drop of peanut oil Blower blowing, no effect. Finally, the use of pipe clamp, spent a tremendous effort to unload. To be bold but cautious, have patience. Be careful not to deform the turbine.

10 remove the screws.

11 remove the gears and springs.

12 take off the lid of the clutch, in turn, the brake disc.

13 remove the clutch cover, the black eye is like a flywheel. When the washing machine rotates at high speed, the brake disc on the cover is tightly wrapped on the wheel, and the wheel stops.

If you are interested in our products, or would like to join us, welcome to contact us.

WUXI XINDU TELEMECANIQUE CO.LTD

TEL:+86-510-85581160

MB:+8613961777588

FAX:+86-510-85140809

E-mail:xd@wxxindu.com

Web:http://www.clutchwxxindu.com

ADD: NO.10Joint Road,Hu Town,Binhu District,Wuxi City,Jiangsu Province,China