WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > Exhibition > Content
LG washing machine clutch removal steps analysis
- Mar 24, 2018 -

In the process of using the washing machine for a long time, some minor faults may occur. If it is detected that the clutch of the LG washing machine has malfunctioned, then it needs to be disassembled for maintenance. How to disassemble it? Next, we briefly introduce the disassembly process of the LG washing machine clutch, hoping to provide some references.

 

The disassembly process of the LG washing machine clutch is as follows:

 

First, the worker needs to unscrew the cover of the LG washing machine clutch and the flywheel connecting bolt from the flywheel, and then remove the clutch cover and pressure plate assembly from the flywheel. It should be noted that if the balance bolts are installed on the bolts, it is better to mark the clutch cover and the balance block for in-situ reloading. The purpose of this is to prevent damage to the dynamic balance of the crankshaft assembly.

 

Next, the worker needs to put the cover of the LG washing machine clutch and the clutch pressure plate assembly on the press bed, and then use a circular pad with a thickness greater than 9.2mm, usually a new structure of 9.7mm and an outer diameter of less than 325mm, on the lower part of the pressure plate. Start with a pressure of over 1.5t.

 

The third step is to remove the lock nut and adjusting nut on the LG washing machine clutch used to separate the lever adjustment screw.

 

The fourth step is to remove the bolts on the drive bolt seats. Note that the burrs need to be disassembled when disassembling. Next, slowly relax the pressing force of the press. After the pressure is fully relaxed, the LG washer clutch pressure plate and cover assembly are all disassembled, and all parts are cleaned and inspected.

 

http://www.clutchwxxindu.com/