WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > Exhibition > Content
The cause of the abnormal noise when reducing clutch is washing and the maintenance method
- Apr 19, 2017 -

The cause of the abnormal noise when reducing clutch is washing and the maintenance method

In the operation of the washing machine, there is  the abnormal noise. We introduce the reasons for this phenomenon and maintenance methods to you.

LG CLUTCH

First, fasteners is a component, when a fastening screw loose, it will have abnormal sound. At this point, it can be fastened.

Second, the gear is installed in the wrong position.

Third, after the long term using of the bearing washing machine, the oil bearing or rolling bearing of the speed reducing clutch will produce different degrees of wear, and the abnormal sound is produced during the operation. At this point, special tools should be used to replace the new bearings.

Panasonic clutch

Fourth, Belt wheel rupture. Check the clutch pulley with or without rupture, if so, replace it with new belt wheel.

 Fifth, Reverse torsion spring rupture. There is abnormal noise when reverse torsion spring rupture or torsion spring is installed in the wrong position. You

Should install the torsion spring again or replace it with new torsion spring.

Sixth, the gears are abrased. The reducer is based on the meshing of gears with different specifications.

If you are interested in our products, please contact us.

WUXI XINDU TELEMECANIQUE CO.LTD
TEL:+86-510-85581160
MB:+8613961777588
FAX:+86-510-85140809
E-mail:xd@wxxindu.com
ADD: NO.10Joint Road,Hu Town,Binhu District,Wuxi City,Jiangsu Province,China