WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > News > Content
How To Control The LG Clutch Semi-linkage
- Oct 20, 2017 -

How to control the LG Clutch semi-linkage
The LG Clutch pedal is used to cut off the power between the engine and the gearbox, which is conducive to starting, shifting, and stopping. So how to better use it?
LG Clutch semi-linked use of the method revealed as follows:
LG Clutch half of the use of one of the exploration
The LG Clutch carried to the car when you start the time you do not lift, if you feel the car some fast, you can step down some more, if you feel the car some slow, you can move again, so that Control the speed within the speed range you want.
LG Clutch Semi-Linked Use of the exploration of the two
When the ramp starts, there are five ways to determine the linkage point:
First, listen to the sound of the engine changes, when the LG Clutch carried to the linkage point when the engine began to transfer power to the back, it is necessary to consume the engine power, so the engine speed down, the sound significantly smaller, then the LG Clutch To the linkage point.
Second, with the feeling of the foot: when the LG Clutch carried to the linkage point when the LG Clutch pedal there is a slight feeling of the top foot, this time, you can also prove that the LG Clutch to the linkage point.
Third, with the vehicle jitter: when the LG Clutch carried to the linkage point when the vehicle and the shift lever on the emergence of a slight trembling phenomenon, this time, also proved that the LG Clutch to the linkage point.
Fourth, look at the engine tachometer speed changes: If you have an engine tachometer, LG Clutch lift in the process, if your car engine tachometer speed significantly decreased, you can also prove that the LG Clutch on the lift To the linkage point.
Fifth, with the impulse of the vehicle: LG Clutch carried to the linkage point when the vehicle has a slight impulse to move forward, then the LG Clutch also carried to the linkage point.
As long as the LG Clutch lift to the linkage point, do not lift (if the lift, the engine on the flame), and do not step down (if the step down, parking brake a lift, the car will slip) (At this time, even if you do not pull the parking brake, the engine will not only remove the parking brake, but also at this time, even if you do not pull the parking brake, the engine will not only pull the brake, Will not turn off the fire, the vehicle will not slip back, is the reason, if you do not even leave the parking brake at this time, will cause the LG Clutch friction plate to accelerate wear, and soon put the LG Clutch friction tablets worn or Burned), the car started (if the car does not move, can lift a little car began to go), after the start must wait for more than 5 meters before the car, in order to lift all the LG Clutch pedal slowly. Otherwise the engine will turn off.
Note: At this time the throttle than the flat start when the big, because the plane started, the engine only to overcome the driving resistance of a vehicle itself, uphill but also to overcome the ramp resistance, due to increased resistance, so the need Engine power is big. So, the throttle is bigger than the plain road. The number of appropriate, depending on the size of the ramp to decide, if the ramp is not too large, the throttle appropriate on the line, if the ramp is steeper, then the throttle will be bigger, the largest, do not exceed the middle of the engine Rotating speed. In short, a principle, when the ramp starts, be sure to keep the engine powered.
After the gear is put on, the LG Clutch pedal will be lifted for 2 - 3 seconds before the LG Clutch pedal is lifted to the linkage point. Otherwise, the vehicle will be seated (when the throttle is released) or rushed Did not release) phenomenon, the phenomenon of recoil vehicles, because the shift speed is too high, the vehicle rushed into the phenomenon, because the engine speed is too high to. In the study period, this phenomenon is difficult to avoid, so, in the LG Clutch pedal carried to the linkage point when the time to stop 2 - 3 seconds, the engine and the speed of the vehicle in the LG Clutch semi-linkage effect, it will shrink Or equal, then the LG Clutch pedal all lifted, it will not appear sitting and rushed into the phenomenon. If you can speed and engine speed with a very understanding, that is, LG Clutch pedal lift and then fast, there will not be sitting and rushed into the phenomenon, to achieve the above realm, not a month or two can do, must go through A longer period of experience and practice can be achieved, that is, frozen three feet, not a day of cold. I do not know you have not noticed, the file after the change, sometimes you put the LG Clutch pedal quickly lifted, the vehicle will not appear sitting and rushing phenomenon, is the reason