WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > News > Content
How To Explain The Semi-linkage Of The Samsung Clutch
- Jul 31, 2017 -

How to explain the semi-linkage of the Samsung Clutch
The Samsung Clutch pedal function is to cut off the power between the engine and the gearbox, which is conducive to starting, shifting, and stopping. So how to better use it?
Samsung Clutch semi-linked use of the method revealed as follows:
Samsung Clutch half of the use of one of the exploration
The Samsung Clutch to the car when you start to move when you do not lift, if you feel the car some faster, you can step down some more, if you feel the car some slow, you can move up again, so that Control the speed within the speed range you want.
Samsung Clutch semi-linked use of the exploration of the two
When the ramp starts, there are five ways to determine the linkage point:
First, listen to the sound of the engine changes when the clutch Samsung carried linkage point, the engine starts transmitting power to the rear, the engine will consume power, and therefore the engine speed decreases, the sound significantly smaller, then the clutch will Samsung Carry the linkage point.
Second, with the feeling of foot: When the Samsung Clutch carried to the linkage point when the Samsung Clutch pedal there is a slight feeling of the top feet, this time, you can also prove that the Samsung Clutch to the linkage point.
Third, with the vehicle jitter: When the Samsung Clutch carried to the linkage point when the vehicle and the shift lever on the emergence of a slight trembling phenomenon, this time, also proved that the Samsung Clutch to the linkage point.
Fourth, look at changes in engine tachometer speed: If you have a car engine tachometer, raised in the course of the Samsung Clutch in, if the speed of your car engine tachometer decreased, can also prove to lift the Samsung Clutch To the linkage point.
Fifth, with the impulse of the vehicle: the Samsung Clutch carried to the linkage point when the vehicle has a slight impulse to move forward, then the Samsung Clutch also carried to the linkage point.
As long as the Samsung Clutch lift to the linkage point, do not lift (if the lift, the engine on the flame), and do not step down (if the step down, parking brake a lift, the car will slip) when you set up both the parking brake is released (because Samsung Clutch plate between the pressure plate and flywheel, torque is transmitted only at this time, they produce slip, the reason why at this time, even if you do not pull the parking brake, engine both Will not turn off the fire, the vehicle will not slip back, that is the reason, if you do not even leave the parking brake, will cause the accelerated wear of the Samsung Clutch friction plate, and soon put the Samsung Clutch friction tablets worn or Charred), the car started (if the car does not move, can lift a little car began to go), after the start must wait for more than 5 meters before the trip to the Samsung Clutch pedal slowly all lifted. Otherwise the engine will turn off.
Note: the throttle at this time than the start of the road to large, because the road in the start, the engine only to overcome the driving resistance of a vehicle itself, uphill to overcome the ramp resistance, due to increased resistance, so the need The engine power is big. So, the throttle is bigger than the plain road. The specific number of appropriate, according to the size of the slope to decide, if the ramp is not too large, the throttle appropriate on the line, if the ramp is steeper, then the throttle will be bigger, the largest, do not exceed the middle of the engine Rotating speed. In short, a principle, when the ramp starts, be sure to keep the engine powered.
Samsung Clutch semi-linked use of revealing the three
When the shift half-linked use:
After the gear is changed, the Samsung Clutch pedal will be lifted for 2 - 3 seconds before the Samsung Clutch pedal is lifted to the linkage point. Otherwise, the vehicle will be seated (when the throttle is released) or rushed Did not release) phenomenon, the phenomenon of recoil when the vehicle is because the shift speed is too high, the vehicle rushed into the phenomenon, because the engine speed is too high to. In the study car, this phenomenon is difficult to avoid, so the Samsung Clutch pedal to the linkage point when the time to stop 2 - 3 seconds, the engine and the speed of the vehicle in the Samsung Clutch semi-linkage effect, it will shrink Or equal, then the Samsung Clutch pedal all lifted, it will not appear sitting and rushed into the phenomenon. If you can fit the vehicle speed and engine speed is very understanding, is the Samsung lift the clutch pedal again soon, will not appear to sit back and stormed the phenomenon, to achieve the above-mentioned state, not a month or two can do, we must go through A longer period of experience and practice can be achieved, that is, frozen three feet, not a day of cold. I do not know you have not noticed, the file after the change, sometimes you put the Samsung Clutch pedal quickly lifted, the vehicle will not appear sitting and rushed into the phenomenon, is the reason.