WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > News > Content
Panasonic Clutch And Throttle Operating Essentials And Precautions
- Jun 22, 2017 -

Panasonic Clutch and throttle operating essentials and precautions
Panasonic Clutch and throttle with the tacit understanding of the standard, is the speed of the shift after the speed to measure. And in the subjects of the two exams when the main test is the Panasonic Clutch, step off the clutch is the key. There are a lot of children's shoes will be wrong to brake when the brake, this is a fatal mistake ah.
1, Panasonic Clutch and throttle operating essentials
Panasonic Clutch and throttle at the start of the car with the bad, it will make the engine flame or car start trembling. The engine power is transmitted to the wheels by the Panasonic Clutch and the distance to the Panasonic Clutch pedal is only about 1 cm. Therefore, when the Panasonic Clutch pedal is depressed and the gears are lifted, the Panasonic Clutch pedal is lifted to the Panasonic Clutch. , In this position feet to pause, while the fuel door, until the Panasonic Clutch plate fully contact and then fully lift the Panasonic Clutch pedal. This is the "two fast one slow", that is, the speed of raising the pedal slightly faster, slow in the middle,
2, two feet Panasonic Clutch operation method
Variable speed, regardless of high gear shift low block, or low block high gear, should be used two feet Panasonic Clutch shift method. (Figure 2-22), to quickly and agile action, first down the Panasonic Clutch pedal, while relaxing the accelerator pedal, and then the shift lever into the neutral position, quickly lift the Panasonic Clutch pedal and then immediately And then swing the lever into the high gear position, lift the Panasonic Clutch pedal, while the fuel throttle, when the Panasonic Clutch plate just when the pause, until the Panasonic Clutch plate fully contact, and then fully lift the Panasonic Clutch pedal The
(Figure 2-23), to agile action, first down the Panasonic Clutch pedal, while relaxing the accelerator pedal, the shift lever into the neutral position, quickly lift the Panasonic Clutch pedal, while fast plus one Foot throttle and then relax the accelerator pedal (plus air is to improve the engine speed to drive the transmission speed of the drive gear), and then quickly depress the Panasonic Clutch pedal, the shift lever to replace the lower gear position. The whole action should be fast, compact and accurate.
The purpose of the two-legged Panasonic Clutch operation is to make the speed of the intermediate shaft (and the first axis) compatible with the speed of the second shaft of the transmission. High block low gear, the use of two feet Panasonic Clutch operation method is to make the transmission shaft speed and the second axis of the transmission speed to adapt to avoid the addition and subtraction due to gear speed is not suited to collision and sound. This will not only make the vehicle smooth speed, but also extend the service life of the parts. Note: increase the engine oil to increase the speed, should be based on the appropriate speed of driving, so that the engine speed and speed coincide, with the must be consistent, otherwise the gearbox gear or synchronizer will sound.
3, operational considerations
(1) When the vehicle is running normally, the foot can not be placed on the Panasonic Clutch pedal.
(2) when driving, can not use semi-linked Panasonic Clutch, special circumstances need half linkage, should be shortened semi-linkage time to prevent burning loose clutch friction plate.