WUXI XINDU TELEMECANIQUE CO.LTD

High quality products, professional services, is the core supplier of the clutch industry!

Home > Exhibition > Content
High-speed rotation and control requirements of washer washing machine transmission clutch
- Dec 26, 2018 -

Washing machine washing machine drive clutch is the heart of the device, the most mechanical failure of its fully automatic washing machine occurs in the clutch and its related components. The clutch can be broken down into two parts, the clutch and the reducer. The reducer can be seen as part of the clutch.

The washer washing machine transmission clutch of the washing machine is mainly installed at the bottom of the outer tub of the washing machine, and its action is controlled by the drainage electromagnet, and there are two working states of washing and dehydrating. When washing, the pulsator rotates at a low speed, and when dehydrating, the inner barrel and the pulsator are driven to rotate at a high speed.

When the washing machine drive clutch is washing, the drain electromagnet is de-energized. Under the action of the drain valve spring and the brake torsion spring, the gear cover and the brake lever are restored, the brake band is tightened, and the pawl is extended into the ratchet. The ratchet is turned counterclockwise by an angle, and the fixed end of the square wire clutch spring rotates through the same angle in the counterclockwise direction of the ratchet wheel, so that the diameter of the fixed end is rotated and separated from the clutch sleeve. Although the large pulley also drives the clutch sleeve to rotate, the clutch sleeve is only idling. The large pulley wheel drives the gear shaft to rotate, and the pulsator shaft rotates through the planetary reducer, and the pulsator is fixed by screws on the pulsator shaft, and the pulsator rotates.

 

https://www.clutchwxxindu.com/