High quality products, professional services, is the core supplier of the clutch industry!

Home > News > Content
Panasonic Clutch Adjustment Maintenance Method
- Jul 31, 2017 -

Panasonic Clutch adjustment maintenance method
  The role of the Panasonic Clutch: the clutch is directly connected with the engine in the car drive system, it can make the engine power and transmission device smoothly or temporarily separated, reliable transmission of engine torque, so that the pilot driver to start the car , Parking, shift and other operations. Panasonic Clutch does not need maintenance or maintenance as much as other car parts, but some adjustments in use must still be done.
1. Measurement and adjustment of the height of the Panasonic Clutch pedal
The distance from the floor to the pedal surface is called the pedal height, ie, a, the standard value is 180.5mm. If it does not match, adjust the pedal stop bolt, adjust the standard value and tighten the lock nut.
2. Measurement and adjustment of free clearance of Panasonic Clutch pedal
Panasonic Clutch pedal If there is no free travel, will cause the Panasonic Clutch slip, the car running weak; if the Panasonic Clutch pedal free travel is too large, can not make the Panasonic Clutch completely separated, will cause the shift difficult.
When checking, press the Panasonic Clutch pedal until you feel the resistance. This trip is the free travel of the Panasonic Clutch pedal. The free travel must be within the limits specified in 6-13 mm. If you do not meet the requirements should be to the maintenance station maintenance.
Panasonic Clutch pedal free gap measurement and adjustment methods are as follows:
Use the ruler to measure the loose clutch pedal free clearance, ie b distance, the standard value of 6 -13 mm, if not match, should adjust the Panasonic Clutch master cylinder length, adjust the standard value and tighten the plunger lock nut.
3. Demolition of hydraulic piston clutch mechanism
The Panasonic Clutch hydraulic system is deflated and the Panasonic Clutch oil sae j1703 (or d0t3, dot4) should be released for each release of the Panasonic Clutch tubing, the Panasonic Clutch hose, the Panasonic Clutch master cylinder, or the Panasonic Clutch pedal feel weak, Do not use poor quality Panasonic Clutch oil.
(1) Use a plastic hose over the bleed bolt to direct the discharged Panasonic Clutch oil into a container and open the Panasonic Clutch wheel cylinder bleed bolt.
(2) Slowly press the Panasonic Clutch pedal, if the reciprocating press the Panasonic Clutch pedal too fast, the air in the cylinder will not be able to let go, each time you relax the clutch pedal to return to the highest position.
(3) Tighten the Panasonic Clutch pedal and tighten the bleed bolt.
(4) Put the loose clutch oil to the storage tank to the specified position.
Panasonic Clutch maintenance method, how to reduce wear and tear
Start with a block to get the maximum torque at start, reducing the Panasonic Clutch overload. Reduce the Panasonic Clutch in a semi-linked state, the use of Panasonic Clutch pedal should be tread in the end, after the release completely to ensure that the Panasonic Clutch completely separated and reliable combination. After the success of the clutch should be loose as soon as possible to reduce the Panasonic Clutch pressure plate and pressing the unnecessary friction. Do not place your feet on the Panasonic Clutch pedal during normal operation to ensure full engagement of the Panasonic Clutch.